What is the Biggest Cause of Warehouse Injuries and Fatalities?
We all know how quickly a warehouse injury can happen. Poor housekeeping, manual handling issues, falls from height, faulty equipment, poor lighting and unsafe racking can all create risks for your warehouse. But when you look at the incidents most likely to cause life-changing injury or death, vehicles are the leading cause.
The risks are not always the vehicles themselves. Research and statistics show a mix of moving machinery, pedestrians, speed, blind spots and heavy load issues. This disproportionate share of serious incidents in warehouses includes forklifts, reach trucks, pallet trucks, lorries and other large vehicle types.

What is the biggest killer in the workplace?
Across many high-risk sectors, moving vehicles are among the most serious causes of fatal workplace accidents. In warehouses, logistics yards and industrial facilities, that usually means:
Forklift trucks
Reach trucks
Powered pallet trucks
Telehandlers
Yard shunters
Delivery lorries
Vans reversing or manoeuvring
Mobile plant and handling equipment
A forklift does not need to be travelling fast to cause severe harm. Its weight, limited visibility, turning circle and load can make even low-speed contact dangerous. A pedestrian struck by a forklift, trapped against racking or pinned near a loading bay, can suffer serious injuries, and can happen within seconds.
The highest-risk situations tend to be repetitive and can include;
A pedestrian crosses a vehicle route without a clear segregation system.
A forklift reverses out of an aisle with poor visibility.
A driver turns with a raised or unstable load.
A lorry manoeuvres in a yard used by staff on foot.
A vehicle strikes racking, which then creates a secondary collapse risk.
A pallet truck enters a congested picking area.
This is why workplace transport safety is central to any serious warehouse safety programme. Forklift safety, pedestrian segregation, impact protection, HSA compliance and workplace transport safety are all themes that should be included in your safety system.
What are 90% of safety incidents caused by?
You may hear the claim that 90% of safety incidents are caused by human error. It is a common phrase in safety conversations, but it can be misleading, as not all factors are mentioned. Human behaviour plays a part in many incidents. Someone may take a shortcut, walk into a vehicle route, drive too quickly, overload equipment or ignore a damaged barrier. But stopping there does not solve the real problem.
Most incidents have deeper causes, such as:
Poor site layout
Weak pedestrian segregation
Inadequate training
Lack of supervision
Time pressure
Poor lighting
Unclear signage
Poor maintenance
Missing impact protection
No reporting culture for near misses
If a forklift driver regularly reverses through a blind corner, the risk is not only the driver’s behaviour. The layout or permitted route may be wrong. The corner may need better visibility, a one-way system, barriers, speed controls or a different traffic route.
What about if a pedestrian keeps cutting across a loading area? The designated walkway may be too long, poorly marked or blocked by stock. People tend to follow the route that feels easiest unless the safer route is clear, protected and practical.
The best safety systems do not rely on everyone making perfect decisions every minute of the day. They reduce the chance of a bad decision leading to serious harm.
That means designing out risk where possible, then using physical controls where the risk remains. Training matters, but training alone will not stop a forklift from entering a pedestrian space. Clear separation, barriers and controlled routes make the safe choice easier.
For a closer look at why physical protection matters, see Polybar Group’s guide to why every warehouse needs impact protection systems.

What are the five most common hazards found in a warehouse?
Every warehouse is different, but most facilities share a core set of hazards. These five appear often during our safety reviews.
1. Vehicle and pedestrian interaction
This is the most serious risk in many warehouses. Forklifts and pedestrians often operate in the same space, especially near loading bays, pick faces, goods-in areas, dispatch zones and cross-aisles.
Controls should include:
Defined vehicle routes
Protected pedestrian walkways
Crossing points with good visibility
Speed limits
One-way systems where suitable
Physical impact barriers
Clear yard management
2. Manual handling
Lifting, pushing, pulling and carrying are daily tasks in warehouses. Poor manual handling can cause strains, sprains and long-term musculoskeletal injuries. Common causes include heavy items, awkward loads, repetitive tasks, poor storage height and pressure to move stock quickly. Mechanical aids, better storage design and practical training can reduce this risk.
3. Slips, trips and falls
A loose strap, broken pallet, wet floor or trailing cable can cause a serious fall. These incidents often look minor on paper, but they can lead to fractures, head injuries and long absence from work.
Good housekeeping is one of the simplest controls, but it needs consistency. Walkways must stay clear, spillages must be dealt with quickly, and damaged flooring should be repaired before it becomes normalised.
4. Falls from height
Falls may happen from loading docks, mezzanines, ladders, racking, vehicle beds or temporary access equipment. Even a relatively low fall can cause serious injury.
Controls include edge protection, safe access equipment, work-at-height planning and a strict approach to unsafe climbing on racking or pallets.
5. Racking and storage hazards
Racking damage is common in busy warehouses. A small impact from a forklift can weaken uprights, beams or guards. If damage goes unreported, the risk grows over time.
Regular racking inspections, load notices, safe pallet placement and rack protection all help reduce the chance of collapse. Impact protection is especially important around end-of-aisle racking, corners and high-traffic routes.
Polybar Group has also outlined the seven highest-risk zones in your warehouse, which is a useful starting point when reviewing where protection is most needed.
What are 10 common hazards found in the workplace?
Warehouses sit within a wider workplace safety picture. Many of the risks found in a warehouse also appear in factories, distribution centres, workshops, yards and cold storage facilities.
Here are 10 common workplace hazards to check during a safety review.
Hazard | What to look for |
Moving vehicles | Forklifts, lorries, vans, reversing vehicles and shared traffic routes |
Manual handling | Heavy lifting, awkward loads, repetitive movement and poor storage height |
Slips and trips | Spillages, debris, uneven floors, loose packaging and blocked walkways |
Falls from height | Loading docks, ladders, mezzanines, racking and vehicle beds |
Falling objects | Poor stacking, unstable pallets, overhead storage and damaged racking |
Machinery hazards | Moving parts, poor guarding, maintenance work and unsafe isolation |
Fire risks | Blocked exits, poor storage, charging areas and flammable materials |
Noise | Machinery, loading activity, impact noise and prolonged exposure |
Hazardous substances | Cleaning chemicals, fuels, battery acid and poor labelling |
Poor lighting and visibility | Blind corners, dark aisles, glare, yard lighting and hidden crossing points |
A good risk assessment should not treat these as separate boxes to tick. Hazards often connect.
For example, poor lighting can increase vehicle risk. Damaged racking can increase falling object risk. Congested aisles can increase manual handling, trip and forklift risks at the same time.
The strongest safety plans look at how work actually happens. Watch shift changeovers, goods-in peaks, dispatch deadlines and busy picking periods. That is when shortcuts appear, and controls are tested.
How Polybar Group can help reduce the risk in your facility
Polybar Group works with warehouses and industrial facilities across Ireland to reduce impact risk, protect people and protect critical assets using polymer barriers and guardrails and our new AI camera systems.
Our safety solutions keep vehicles, pedestrians, stock, racking and infrastructure separated where it matters most.
That can include protection for:
Pedestrian walkways
Forklift routes
Racking ends
Loading bays
Dock doors
Machinery
Walls and columns
Cold storage areas
Fire exits and emergency routes
High-risk corners and crossing points
Polymer safety systems are designed to absorb and deflect impact. Compared with rigid steel in some applications, polymer barriers can help reduce floor damage and recover shape after impact, depending on the system and installation. The right choice depends on the type of vehicle, traffic flow, impact risk and site conditions.
The process should begin with a site review, not a product list. A useful safety survey looks at:
Where vehicles travel
Where pedestrians walk
Where routes cross
Where impacts have already happened
Which assets are critical to operations
Where visibility is poor
Where congestion builds up
Which areas carry the highest severity risk
From there, controls can be matched to the actual risk. In some areas, floor markings and signs may be enough. In others, physical segregation is the only sensible option.
To understand the wider role of polymer systems, read Polybar Group’s guide to impact protection and polymer safety systems for warehouses and industrial facilities in Ireland.
If you want a practical view of risk across your own site, you can also arrange a warehouse safety survey.

Frequently asked questions
What is the number one cause of injuries in a warehouse?
For all injuries, causes can vary by site. For the most severe warehouse injuries and fatalities, forklifts and other workplace vehicles are one of the leading risks. Vehicle and pedestrian interaction should be one of the first areas assessed.
Why are forklifts so dangerous in warehouses?
Forklifts are heavy, powerful and often operate in tight spaces with limited visibility. They may carry loads that block the driver’s view or affect stability. When forklifts operate near pedestrians, the risk of serious injury rises sharply.
What is pedestrian segregation?
Pedestrian segregation means keeping people on foot separated from moving vehicles. This can include protected walkways, barriers, marked crossings, one-way vehicle routes, gates, signs and controlled access zones.
Are floor markings enough for forklift safety?
Floor markings help, but they do not physically stop a vehicle. In low-risk areas, markings may be suitable. In high-risk areas, such as forklift routes beside pedestrian walkways, physical impact protection is often the safer option.
How often should warehouse safety risks be reviewed?
Risk should be reviewed regularly and whenever site conditions change. That includes layout changes, new vehicles, new racking, higher traffic levels, new shifts, changes in stock profile or after any collision or near miss.
The key takeaway for safer warehouses
Warehouse safety covers many hazards, but the most serious question is often the simplest one: can a moving vehicle hit a person, a structure or a critical asset?
If the answer is yes, the risk needs more than a warning sign. It needs a clear plan, good layout, trained people, proper supervision and, where needed, physical protection that separates vehicles from pedestrians and vulnerable areas.
Reducing forklift and vehicle risk is not only about compliance. It protects people, prevents disruption and helps the whole facility operate with more confidence.




Comments